It is never pleasurable to notice a sound on your vehicle that you don’t know where it comes from. You may be thinking about what to do when you detect a reversing gear noise that lasts on your Audi Q8? Any gearbox trouble can be important, but before making sure, it is better to do a few investigations. Our team has created this document to help you resolve it. First, we will see what the sources and the different gearbox noises can be on Audi Q8, and second, what are the solutions available to you.
Classical reverse Audi Q8 noises and some tips to look after your gearbox
Why does the reversing of my Audi Q8 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The sound generated by the reversing of your Audi Q8 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will exert on the gears will be monumental and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you hear a reverse noise on your Audi Q8 if you shift gear under these conditions.
Different Audi Q8 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this document, to find out about the cause of reversing noise on Audi Q8. Here are the 3 typical noises you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Audi Q8, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check this content page for more information about strut mount noises on Audi Q8.
An increased reverse knocking noise on Audi Q8X
If you are subject to a knocking noise when you are in reverse with your Audi Q8 and this noise tends to increase as you gain speed. It is conceivable that you are confronting a serious trouble that needs to be fixed fairly quickly before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your vehicle to your technician quickly or read this content page about gearbox noise on Audi Q8 for more data.
I find out a noise when I go in reverse
Listening a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Audi Q8 reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
