It is never pleasurable to perceive a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you notice a reversing gear noise that lasts on your Audi Tt? Any gearbox issue can be serious, but before making sure, it is better to do a few checks. Our team has written this article to help you deal with it. First, we will see what the sources and the different gearbox noises can be on Audi Tt, and second, what are the solutions available to you.
Classical reverse Audi Tt noises and some tips to preserve your gearbox
Why does the reversing of my Audi Tt make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The sound generated by the reversing of your Audi Tt is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will exert on the gears will be enormous and you will generate a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you notice a reverse noise on your Audi Tt if you shift gear under these conditions.
Diverse Audi Tt reversing noises and their causes
Finally in this section, we will move on to what you are probably most excited about in this content, to find out about the source of reversing noise on Audi Tt. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Audi Tt, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to browse this content for more information about strut mount noises on Audi Tt.
An increased reverse knocking noise on Audi TtX
If you are subject to a knocking noise when you are in reverse with your Audi Tt and this noise tends to build up as you gain speed. It is conceivable that you are dealing with a serious issue that needs to be solved very fast before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears before long. Take your vehicle to your repair shop quickly or check out this content about gearbox noise on Audi Tt for more information.
I acknowledge a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Audi Tt reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
