It appears sometimes that your car makes noises in the brake calipers, you are pretty much never reassured by this kind of noise and you immediately tend to think that you will have an incident or that the repair will cost you an substantial sum. So, what if you detect noise from the brake calipers on your Fiat Bravo 2? It most likely is not anything major and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have decided to write this article and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Fiat Bravo 2, and give you the explanations for them in order to help you resolve the issue.
The different types of brake caliper noise on Fiat Bravo 2 and their causes
The function of the Fiat Bravo 2 brake calipers is to come pinch the brake discs of your Fiat Bravo 2 thanks to the pads they will activate. This component is an essential element of your vehicle’s safety. Discovering a sound from it must therefore be examined quickly and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Fiat Bravo 2
If you find out a grinding or scrap metal noise coming from the brake calipers of your Fiat Bravo 2, it is highly imaginable that it will be caused by brake pads at the end of their existence, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Fiat Bravo 2. If after examining this point, you’re still having a grinding noise on your Fiat Bravo 2, have a look at this article to find a solution.
I feel a continuous noise that stops when I brake from my Fiat Bravo 2 brake calipers
If you are the victim of a regular noise in the brake calipers of your Fiat Bravo 2 that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam over time, especially if they are not used enough. When this happens, they will tend to keep on being in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Fiat Bravo 2
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Fiat Bravo 2, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be replaced at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your auto mechanic.
When I brake, I feel a squealing in my brake calipers of my Fiat Bravo 2
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Fiat Bravo 2, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
