It occurs in some cases that your car makes noises in the brake calipers, you are almost never reassured by this sorts of noise and you instantly tend to think that you will have an incident or that the repair will cost you an substantial amount. So, what if you discern noise from the brake calipers on your Hyundai Ix35? It is probably not anything serious and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have chosen to compose this article and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Hyundai Ix35, and give you the explanations for them in order to help you fix the issue.brake-caliper-noisehyundai-ix35

The different types of brake caliper noise on Hyundai Ix35 and their causes

The function of the Hyundai Ix35 brake calipers is to come pinch the brake discs of your Hyundai Ix35 thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Finding out a noise from it must therefore be analyzed promptly and leaving it lying around is not a good choice.

I hear a grinding noise on my brake calipers on Hyundai Ix35

If you hear a grinding or scrap metal noise coming from the brake calipers of your Hyundai Ix35, it is highly possible that it will be linked to brake pads at the end of their existence, actually, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Hyundai Ix35. If after checking out this point, you’re still encountering a grinding noise on your Hyundai Ix35, have a look at this article to find a solution.

I feel a constant noise that stops when I brake from my Hyundai Ix35 brake calipers

If you are the victim of a regular noise in the brake calipers of your Hyundai Ix35 that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. Indeed, they can jam over time, specifically if they are not employed enough. When this happens, they will tend to keep on being in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.

When I brake, my brake pedal vibrates on my Hyundai Ix35

If in your case, you feel a vibration when braking that would have come from the brake calipers of your Hyundai Ix35, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be replaced at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your auto technician.

When I brake, I feel a squealing in my brake calipers of my Hyundai Ix35

Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Hyundai Ix35, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).