You listen to a starter motor noise on your Ford Puma once you start your vehicle. We can understand that this is not pleasant and that you have questions. Discovering such a noise is not always a good indication, but it may also be nothing major. To support you fix this problem, our team has chosen to produce this content page to assist you in this research. First, we will explain how the starter motor works on your Ford Puma, and then what starter motor noises you can experience on your Ford Puma.
Functioning and various information
Function of a starter motor on Ford Puma
The starter motor is an electric motor whose sole task is to start the engine unit of your automobile. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ford Puma is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Ford Puma
- Do not try to start your engine for too long
- Do not use a starter motor on Ford Puma with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your automobile, the energy it is capable of holding may not be sufficient to provide the power required by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not correct the origin of your failure to start repeatedly, your starter may be the future part you will have to replace.
I listen to noises from the starter motor of my Ford Puma, what are the causes?
I feel a loud noise from the starter of my Ford Puma
If you notice a starter motor noise on Ford Puma and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be ideal, in which circumstance the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Examine the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Ford Puma change it.
If it is a noise in the front of your automobile but it seems to you after examining not to come from your starter, browse this content page about front end noise on Ford Puma which may give you other leads to resolve your noise problem.
I listen to a clicking noise of the key running in my neiman but no noise at the starter motor of my Ford Puma
If you listen to a clicking noise at the starter motor of your Ford Puma, there are two possible failures linked to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a problem with unplugged cable verify your electrical installation. If after checking this clicking noise on Ford Puma doesn’t come from your starter motor, check this article for more informations.
