It appears in some cases that your automobile makes noises from your brakes, you are almost never reassured by this sort of noise and you automatically tend to think that you will have an accident or that the fix will cost you an substantial amount of money. So, what if you find noise from the brake on your Ford Puma? It might not be anything major and you would be able to repair it on your own, but when in doubt, as with such problem your security and the one from other is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have made the decision to compose this document and give you the opportunity to find the problem and find a solution. We will go through several steps, review all plausible origins of brake noise on Ford Puma, and deliver you the reasons for them in order to help you resolve the problem.
The several types of brake noise Ford Puma and their causes
The objective of the Ford Puma brakes is to come slow down and stop your car. This element is an important component of your vehicule’s safety. Experiencing a noise from it must therefore be analyzed quickly and leaving it lying around is not a good choice.
I perceive a grinding noise on my brake Ford Puma
If you find out a grinding or scrap metal noise coming from the brake of your Ford Puma, it is highly possible that it will be related to brake pads at the end of their existence, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out with time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may fluctuate. Take off the wheels in question and verify the wear indicator on them. If they are out of date, they must be replaced quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Ford Puma. If after verifying this point, you’re still encountering a grinding noise on your Ford Puma, have a look at this article to find a solution.
I feel a uninterrupted noise that stops when I brake with my Ford Puma
If you are the victim of a constant noise from the brakes Ford Puma that only ceases when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam with time, specifically if they are not used enough. When this happens, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake many times frankly to try to unblock them. If this does not work, it will be necessary to think about swapping them.
I feel vibration when I brake with my Ford Puma
If in your situation, you feel a vibration when braking that would have come from the brake your Ford Puma, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can verify it by disassembling your wheels. If so, change them or have them replaced by your mechanic.
I experience a squealing noise when I brake with my Ford Puma
Finally, if you notice a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Ford Puma, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
