You acknowledge a starter motor noise on your Fiat Punto 2 each time you start your automobile. We can understand that this is not pleasant and that you have inquiries. Hearing such a noise is not always a good indication, but it may also be nothing severe. To support you fix this issue, our team has decided to write this article to support you in this research. First, we will explain how the starter motor works on your Fiat Punto 2, and then what starter motor noises you can encounter on your Fiat Punto 2.
Functioning and various information
Function of a starter motor on Fiat Punto 2
The starter motor is an electric motor whose single role is to start the engine of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Fiat Punto 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Fiat Punto 2
- Do not run your starter too long
- Do not use a starter motor on Fiat Punto 2 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be enough to give the power demanded by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not resolve the cause of your failure to start repeatedly, your starter may be the future element you will have to change.
I acknowledge noises from the starter motor of my Fiat Punto 2, what are the triggers?
I experience a loud noise from the starter of my Fiat Punto 2
If you hear a starter motor noise on Fiat Punto 2 and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which situation the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Verify the state of the drive pinion, if it is the part responsible of the starter motor noise on your Fiat Punto 2 replace it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, check this article about front end noise on Fiat Punto 2 which may give you other leads to fix your noise issue.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Fiat Punto 2
If you acknowledge a clicking noise at the starter motor of your Fiat Punto 2, there are two possible failures associated with this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a issue with unplugged cable examine your electrical installation. If after looking at this clicking noise on Fiat Punto 2 doesn’t come from your starter motor, check this article for more informations.
