Do you perceive a metallic noise on your Dodge Caliber when you drive? We understand that this is not pleasant and that you have questions. Finding out such a noise is not always a good signal, but it may also be nothing serious. To help you resolve this issue, our redaction decided to create this article content to help you in this search. In order to perform this research as efficiently as possible, we will first take a look at the possible sources of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Dodge Caliber coming from the front end of the car
I perceive a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the probable causes of metal noise manifestations on your Dodge Caliber, may be that one of your bearing is tired, it will frequently generate a loud noise that increase when stressed (turns faster and faster). So take into account to check by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well located here, if this is the case replace it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide on loud noise on Dodge Caliber, you will most likely find a solution to your issue.
If you discern a metalic noise on Dodge Caliber and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To check this, put your car on safety stand, and check the state of your discs and pads by removing the wheel. If they are involved, replace them promptly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want infos about it, browse this article for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Dodge Caliber, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To check this, position yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we suggest that you have a look at this article content for a complete guide about steering noises on Dodge Caliber.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Dodge Caliber. Once screwed up, they will no longer accomplish their role as shock absorbers and, with each impact, or violent acceleration, a noise will come out. Therefore, bear in mind to check their status and replace them if necessary. Feel free to browse this article content which is a complete file about strut mounts noises on Dodge Caliber, how to check their state and swap them.
Finally, the last basic reason of metallic noise on Dodge Caliber. It’s because your transmission system is the source. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we suggest that you look at this detailed guide on the sources of steering noises on Dodge Caliber.
Metallic noise Dodge Caliber coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you discern an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. In fact, it is possible that either the catalyst or the silencer may be the reason of this sound. To be certain, go under the car, cold, and knock each of the previously stated units with a hammer to locate the source of the noise. You should perceive things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider swapping it, as well as the silencer. In such a case, to eliminate the metallic noise on your Dodge Caliber, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is possible that with wear they are at the origin of your metallic noises on your Dodge Caliber. Go a little further up in the content page where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
