If you too have already experienced a grinding noise on Dodge Caliber, you must have wondering the same questions as all Dodge Caliber owners. We are rarely reassured when a grinding noise arises on our automobile. As we are conscious of your fears and questions, we have chosen to write this article content in order to assist you in and facilitate your search for a remedy to your problem. To do this, first we will see what the origins of a grinding noise on Dodge Caliber are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Dodge Caliber that originates from the shock absorbers and to finish from one of your doors.grinding-noise-dodge-caliber

I hear a grinding noise on Dodge Caliber each time I turn the wheel

First, we will check out the grinding noises on Dodge Caliber that happen when ever you turn the wheel of your automobile. Here are the main explanations for this:

  • Hydraulic system

    • If you are subject to grinding noises on your Dodge Caliber each time you turn the wheels, it may be relating to the hydraulic system of your automobile that allows you to operate the entire power steering part. In this case, the main point to examine is the power steering fluid level, which if below the normal level could be an indication of a leak of the system. In this case, remember to redo the level and examine it regularly. If the problem persists, go to your technician.

  • Bearings

    • “A grinding noise on Dodge Caliber each time I turn the wheels of my automobile” can also be a consequence of premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Keep in mind to examine their state.

  • Steering pump

    • Finally, a grinding noise on Dodge Caliber each time I turn may be associated with a tired steering pump power steering pump. The mission of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may show up between it and the belt. Think about to examine that it is working properly.

    If despite these different solutions you continue to experience a grinding noise on Dodge Caliber when turning your steering wheel, we have wrote a complete article on this subject that can support you locate the origin.

    I listen a grinding noise on Dodge Caliber each time braking

    If you hear a grinding noise from the brakes of your Dodge Caliber, it is highly imaginable that it will be linked with brake pads at the end of their life, actually, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and examine the wear indicator on them. If they are dead they will have to be changed quickly because they will quickly damage your discs.
    If, despite verification, your grinding noise on Dodge Caliber does come from your brakes but is not relating to the pads, examine this content page to find out the other conceivable origins of brake noises on Dodge Caliber.

    I hear a grinding noise on Dodge Caliber at the shock absorbers

    If you are in the scenario where you detect the grinding noise on Dodge Caliber as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply each time you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several explanations that can justify this noise. In fact, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Dodge Caliber

    at each compression.
    Once you have checked out all these elements, you should have found the origin of your trouble, go to your auto technician to fix the defective part. If you have not located the origin of your problem, we encourage that you have a look at this content page which discusses all possible origins of shock absorber noise on Dodge Caliber.

    I hear a grinding noise on Dodge Caliber at a door

    If that’s not enough, don’t hesitate to read this full content page on door sounds on Dodge Caliber.
    It is conceivable, based on the kind of of noise you note, that the hinge of your door is at the source of these noises. If this is the case, you will have to verify it by opening your door and examining that the grinding noise on your Dodge Caliber comes from a hinge that is too dry. To resolve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to read this complete content page on door sounds on Dodge Caliber.