If you too have already experienced a grinding noise on Alfa Romeo 156, you must have wondering the same questions as all Alfa Romeo 156 owners. We are rarely reassured when a grinding noise arises on our automobile. As we are conscious of your uncertainties and questions, we have chosen to compose this content page to be able to support you in and ease your investigation for a remedy to your issue. To do this, first we will see what the origins of a grinding noise on Alfa Romeo 156 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Alfa Romeo 156 that originates from the shock absorbers and to finish from one of your doors.grinding-noise-alfa-romeo-156

I perceive a grinding noise on Alfa Romeo 156 when I turn the wheel

First, we will take a look at the grinding noises on Alfa Romeo 156 that happen when you turn the wheel of your automobile. Here are the main causes for this:

  • Hydraulic system

    • If you feel grinding noises on your Alfa Romeo 156 when you turn the wheels, it may be linked to the hydraulic system of your automobile that allows you to operate the entire power steering part. In cases like this, the main point to check is the power steering fluid level, which if below the normal level could be a sign of a leak of the system. In this case, keep in mind to redo the level and check it regularly. If the issue lasts, go to your auto mechanic.

  • Bearings

    • “A grinding noise on Alfa Romeo 156 when I turn the wheels of my automobile” can also result from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Remember to check their condition.

  • Steering pump

    • Finally, a grinding noise on Alfa Romeo 156 when I turn may be linked to a tired steering pump power steering pump. The goal of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may appear between it and the belt. Bear in mind to check that it is working properly.

    If despite these different solutions you continue to hear a grinding noise on Alfa Romeo 156 when turning your steering wheel, we have wrote a complete content page on this subject that can help you find the origin.

    I hear a grinding noise on Alfa Romeo 156 when braking

    If you perceive a grinding noise from the brakes of your Alfa Romeo 156, it is highly conceivable that it will be linked with brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead they will have to be changed as soon as possible because they will as soon as possible damage your discs.
    If, despite verification, your grinding noise on Alfa Romeo 156 does come from your brakes but is not linked to the pads, check this article content to find out the other plausible sources of brake noises on Alfa Romeo 156.

    I perceive a grinding noise on Alfa Romeo 156 at the shock absorbers

    If you are in the scenario where you discover the grinding noise on Alfa Romeo 156 as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several causes that can justify this noise. In fact, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would result in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Alfa Romeo 156

    at each compression.
    Once you have examined all these points, you should have found the source of your problem, go to your motor mechanic to repair the malfunctioning component. If you have not discovered the source of your issue, we encourage that you look at this article content which discusses all possible origins of shock absorber noise on Alfa Romeo 156.

    I perceive a grinding noise on Alfa Romeo 156 at a door

    If that’s not enough, don’t hesitate to take a look at this complete article content on door sounds on Alfa Romeo 156.
    It is plausible, determined by the type of noise you experience, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and checking out that the grinding noise on your Alfa Romeo 156 comes from a hinge that is too dry. To fix this issue, first try to grease the hinge, in most cases this is enough to solve your issue. If that’s not enough, don’t hesitate to read this complete article content on door sounds on Alfa Romeo 156.