In some cases your automobile can make noises in the front axle, you are very almost never reassured by this sorts of noise and you directly tend to think that you will lose a wheel or that the repair will cost you an huge sum. Thus, what if you detect a noise coming from the front end of your Fiat 500? It may not be much and you can correct the problem yourself, but if in doubt it is better to verify before a larger damage occurs. It is with this in mind that we have decided to compose this article and allow you to locate the problem and find a treatment. We will, through different steps review all the components that can make noises at the front end of your Fiat 500. front-axle-noise-fiat-500

What are the elements that can cause front axle noise Fiat 500?

Most of our job will focus on finding the element that gives your Fiat 500 front wheel noise. The following is a list of the components that are most likely to be making it and how to validate it.

Noise vibration front end Fiat 500 : the shock absorber cup

One of the most likely causes of symptoms on your Fiat 500 front axle noise is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To verify if this is the problem that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, think about swapping them quickly as this may affect other parts and require more costly repairs.

Noise while turning front end Fiat 500 : stabilizer bar

If you know of a noise on your Fiat 500 at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is defective. To validate the origin of the problem, you may feel a lack of stability in the direction of the car (it pulls to the left or it pulls to the right). Also, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.

Front axle noise when turning Fiat 500 : direction triangles

Finally, you may have a noise in the front wheel on your Fiat 500, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also verify the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto technician.

Loud noise front end Fiat 500 : bearings

One of the other likely causes of symptoms of the front axle of your Fiat 500, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So you should verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only happens with an engaged speed, read our article on loud noise on Fiat 500, you will most certainly find an answer to your problem.

Front end noise squeaking Fiat 500 : cardan shaft

One of the most traditional causes when noise happens on the front axle of your Fiat 500 when you turn with your car is linked to the direction of your car. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Fiat 500, do not hesitate to consult this article to find the solution to your problem.