If you too have already experience a grinding noise on Alfa Romeo 159, you must have asked yourself the same questions as all Alfa Romeo 159 owners. We are rarely reassured when a grinding noise happens on our car. As we are conscious of your concerns and questions, we have decided to prepare this article content in order to support you in and facilitate your search for a remedy to your issue. To do this, first we will see what the origins of a grinding noise on Alfa Romeo 159 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Alfa Romeo 159 that originates from the shock absorbers and to finish from one of your doors.grinding-noise-alfa-romeo-159

I hear a grinding noise on Alfa Romeo 159 when ever I turn the wheel

First, we will have a look at the grinding noises on Alfa Romeo 159 that happen every time you turn the wheel of your car. Here are the main causes for this:

  • Hydraulic system
  • If you feel grinding noises on your Alfa Romeo 159 when ever you turn the wheels, it may be relating to the hydraulic system of your car that allows you to run the entire power steering part. In such a case, the main point to examine is the power steering fluid level, which if below the normal level could be an indicator of a leak of the system. In this case, remember to redo the level and examine it regularly. If the issue persists, go to your mechanic.

  • Bearings
  • “A grinding noise on Alfa Romeo 159 when ever I turn the wheels of my car” can also originate from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Think about to examine their condition.

  • Steering pump
  • Finally, a grinding noise on Alfa Romeo 159 when ever I turn may be connected to a tired steering pump power steering pump. The objective of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may emerge between it and the belt. Bear in mind to examine that it is working properly.

    If despite these different solutions you continue to experience a grinding noise on Alfa Romeo 159 when turning your steering wheel, we have produced a complete content on this subject that can support you discover the origin.

    I notice a grinding noise on Alfa Romeo 159 when ever braking

    If you hear a grinding noise from the brakes of your Alfa Romeo 159, it is highly imaginable that it will be linked with brake pads at the end of their life, in fact, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and examine the wear indicator on them. If they are dead they will have to be changed almost instantly because they will almost instantly damage your discs.
    If, despite check, your grinding noise on Alfa Romeo 159 does come from your brakes but is not relating to the pads, examine this content to find out the other plausible sources of brake noises on Alfa Romeo 159.

    I hear a grinding noise on Alfa Romeo 159 at the shock absorbers

    If you are in the scenario where you discover the grinding noise on Alfa Romeo 159 as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply when ever you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several causes that can explain this noise. In fact, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Alfa Romeo 159

    at each compression.
    Once you have inspected all these areas, you should have found the origin of your issue, go to your technician to fix the defective part. If you have not discovered the origin of your issue, we recommend that you have a look at this content which discusses all possible origins of shock absorber noise on Alfa Romeo 159.

    I hear a grinding noise on Alfa Romeo 159 at a door

    If that’s not enough, don’t hesitate to check out this complete content on door sounds on Alfa Romeo 159.
    It is plausible, based on the kind of of noise you know, that the hinge of your door is at the origin of these noises. If this is the case, you will have to examine it by opening your door and checking out that the grinding noise on your Alfa Romeo 159 comes from a hinge that is too dry. To fix this issue, first try to grease the hinge, in most cases this is enough to solve your issue. If that’s not enough, don’t hesitate to check out this complete content on door sounds on Alfa Romeo 159.