Occasionally your car can make noises in the front axle, you are very hardly ever reassured by this types of noise and you immediately tend to presume that you will lose a wheel or that the fix will cost you an huge amount. Thus, what if you discern a noise coming from a gimbals of your Kia Optima? It may not be much and you can repair the issue yourself, but if in doubt it is better to check before a larger problem appears. It is with this in mind that we have chosen to write this article and allow you to find out the issue and find a solution. We will, through some steps review all the elements that can make noises at the front end of your Kia Optima. 
What are the elements that can cause a noise close to gimbals on Kia Optima?
Most of our article will focus on finding the element that gives your Kia Optima gimbals noise. The following is a list of the components that are most likely to be creating it and how to confirm it.
Noise vibration that sounds like gimbals on Kia Optima : the shock absorber cup
One of the most classic causes of noises on Kia Optima that sounds like a gimbals is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, think about changing them quickly as this may damage other components and require more pricey repairs.
Noise while turning that sounds like gimbals Kia Optima : stabilizer bar
If you find out of a noise on your Kia Optima that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To confirm the origin of the issue, you may feel a lack of balance in the direction of the automobile (it pulls to the left or it pulls to the right). Also, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.
Noise when turning Kia Optima : gimbals
One of the most traditional causes when noise shows upand sounds like gimbals on your Kia Optima when you turn with your automobile is related to the direction of your automobile. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Kia Optima, do not hesitate to consult this article to find the solution to your problem.
