It occurs occasionally that your automobile makes noises from your brakes, you are pretty much never reassured by this sorts of noise and you automatically tend to think that you will have an accident or that the repair will cost you an astronomical amount. So, what if you identify noise from the brake on your Fiat 500? It most likely is not anything severe and you may have the capability to repair it on your own, but when in doubt, as with such trouble your security and the one from other is in question, it is better to examine before a more serious failure happens. It’s with idea in mind that we have decided to compose this article and give you the opportunity to locate the trouble and find a solution. We will go through different steps, review all possible sources of brake noise on Fiat 500, and give you the causes for them in order to help you solve the trouble.
The different sort of brake noise Fiat 500 and their origins
The function of the Fiat 500 brakes is to come slow down and stop your car. This component is an essential component of your vehicle’s safety. Finding out a sound from it must therefore be investigated promptly and leaving it lying around is not a good answer.
I listen a grinding noise on my brake Fiat 500
If you find out a grinding or scrap metal noise coming from the brake of your Fiat 500, it is highly imaginable that it will be connected to brake pads at the end of their existence, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out after some time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Take off the wheels in question and examine the wear indicator on them. If they are out of date, they must be changed quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Fiat 500. If after examining this point, you’re still enduring a grinding noise on your Fiat 500, have a look at this article to find a solution.
I feel a frequent noise that stops when I brake with my Fiat 500
If you discover a constant noise from the brakes Fiat 500 that only ends when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam after some time, specifically if they are not employed enough. When this happens, they will tend to stay in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake many times frankly to try to unblock them. If this does not function, it will be necessary to consider swapping them.
I feel vibration when I brake with my Fiat 500
If in your situation, you feel a vibration when braking that would have come from the brake your Fiat 500, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can examine it by removing your wheels. If so, swap them or have them replaced by your auto mechanic.
I feel a squealing noise when I brake with my Fiat 500
Finally, if you feel a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Fiat 500, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).