It is never pleasurable to listen to new sounds on your vehicle. We always might worry and think about the worst. But experiencing wheel noise on Citroen Nemo is very often linked to small trouble that you can easily fix. To support you in this inspection, our team decided to compose this content page to make your life easier and help you in this process. To do this, we will alternately see what are the distinctive noises that Citroen Nemo wheels can provoke and to which failures they are linked.
The different wheel noises on Citroen Nemo and their origins
We will therefore concentrate on the different types of sound you may encounter and their origins.
I notice grinding wheel noise on Citroen Nemo from, cardan shaft
The first situation of grinding wheel noise on your Citroen Nemo is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also plausible that you may encounter this sound when you drive over speed bumps. You should notice a noise close to a cracking . It is quite plausible in this case that one or more bellows of your gimbals are dead. In this situation, the joint must be weakened and the transmission may fail. Check the state of the joint bellows and replace them if needed or risk having your vehicle immobilized. If they have holes, they will rather quickly dry out and fill with dust or stones that will very fast damage the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the cause, have a look at this guide about suspension noise on Citroen Nemo to help you find a solution.
I perceive a wheel noise Citroen Nemo when coasting caused by a bearing
One of the other possible origins of signs on the front wheel of your Citroen Nemo when coasting, may be that one of your bearing is good to be swapped, it will tend to produce a thumping sound that intensifies when it is stressed (turns faster and faster). So be sure to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case replace it or them before long. If, on the other hand, this noise only manifests itself with an engaged speed, have a look at this guide about loud noises on Citroen Nemo, you will most likely find a solution to your problem.
I experience a wheel noise Citroen Nemo caused by brakes
If you perceive noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will generate a loud metallic sound that you will inevitably feel. To verify this, put your vehicle on axle stands, and examine the state of your discs and pads by getting rid of the wheel. If they are involved, replace them rather quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your Citroen Nemo, but the brakes are not the cause, read this guide for more information on this problem.
I acknowledge a wheel noise Citroen Nemo due to faulty wheel alingment
If you encounter a sound that may look like a vibration and will increase as you increase speed, it is plausible that your wheel alingment or balancing is the cause of it. Wheel alingment of a vehicle is a major step that is generally done after each tire swap. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and provoke a significant wheel noise on Citroen Nemo. Examine that your seals are still set up, otherwise go to your mechanic.
I hear a wheel noise Citroen Nemo attributable to wishbone
Finally, you may feel a noise on your Citroen Nemo at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this problem comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto mechanic.
