It is never pleasurable to experience a sound on your vehicle that you don’t know where it comes from. You may be questioning what to do when you find a reversing gear noise that remains on your Renault Kangoo 2? Any gearbox problem can be serious, but before making sure, it is better to do a few investigations. Our team has written this document to support you solve it. First, we will see what the origins and the different gearbox noises can be on Renault Kangoo 2, and second, what are the solutions available to you.
Classical reverse Renault Kangoo 2 noises and some tips to preserve your gearbox
Why does the reversing of my Renault Kangoo 2 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult task. The noise made by the reversing of your Renault Kangoo 2 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will apply on the gears will be significant and you will make a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you hear a reverse noise on your Renault Kangoo 2 if you shift gear under these conditions.
Several Renault Kangoo 2 reversing noises and their origins
Finally in this section, we will move on to what you are probably most excited about in this page, to find out about the origin of reversing noise on Renault Kangoo 2. Here are the 3 typical noises you may be victim of.
I notice a grinding noise when starting in reverse gear
If you experience a grinding noise when you start in reverse with your Renault Kangoo 2, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to read this article for more information about strut mount noises on Renault Kangoo 2.
An increased reverse knocking noise on Renault Kangoo 2X
If you are subject to a knocking noise when you are in reverse with your Renault Kangoo 2 and this noise tends to build up as you gain speed. It is conceivable that you are confronting a serious problem that needs to be resolved right away before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears before long. Take your vehicle to your auto mechanic quickly or browse this content page about gearbox noise on Renault Kangoo 2 for more information.
I listen to a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Renault Kangoo 2 reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.
