It is never pleasurable to discover a sound on your automobile that you don’t know where it comes from. You may be thinking about what to do when you notice a reversing gear noise that persists on your Renault Koleos? Any gearbox issue can be severe, but before making sure, it is better to do a few investigations. Our team has created this paper to support you deal with it. First, we will see what the sources and the different gearbox noises can be on Renault Koleos, and second, what are the solutions available to you.reverse-gear-noise-renault-koleos

Classical reverse Renault Koleos noises and some tips to look after your gearbox

Why does the reversing of my Renault Koleos make a different noise from my other speeds?

De facto, adding all gears, bearings and pinions into a gearbox is a difficult task. The sound caused by the reversing of your Renault Koleos is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears used for the reverse gear.

Tips to reduce wear on your clutch and gearbox

  • Don’t give a big boost:
    Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions.

  • Never reverse while the automobile is in motion or vice versa:
    Reversing the direction of operation of the gearbox during operation is a very bad practice. Indeed, the pressure you will put in on the gears will be monumental and you will generate a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely common if you listen to a reverse noise on your Renault Koleos if you shift gear under these conditions.

Different Renault Koleos reversing noises and their origins

Finally in this section, we will move on to what you are probably most interested in this page, to learn about the cause of reversing noise on Renault Koleos. Here are the 3 typical noises you may be victim of.

I find out a grinding noise when starting in reverse gear

If you discover a grinding noise when you start in reverse with your Renault Koleos, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to read this paper for more details about strut mount noises on Renault Koleos.

An increased reverse knocking noise on Renault KoleosX

If you are subject to a knocking noise when you are in reverse with your Renault Koleos and this noise tends to increase as you gain speed. It is possible that you are dealing with a serious issue that needs to be resolved fairly quickly before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears in short order. Take your automobile to your auto technician quickly or check out this document about gearbox noise on Renault Koleos for more details.

I find out a noise when I go in reverse

Experiencing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Renault Koleos reverse gear makes more noise than before, it is possible that filings have been made and are moving around in it. It is therefore time to empty the box.