You listen a starter motor noise on your Renault Kangoo 2 each time you start your car. We agree that this is not agreeable and that you have questions. Finding out such a noise is not always a good signal, but it may also be nothing significant. To support you fix this trouble, our team has decided to compose this article to assist you in this research. First, we will describe how the starter motor works on your Renault Kangoo 2, and then what starter motor noises you can experience on your Renault Kangoo 2.
Functioning and various information
Function of a starter motor on Renault Kangoo 2
The starter motor is an electric motor whose single role is to start the engine motor of your automobile. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Renault Kangoo 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Renault Kangoo 2
- Do not try to start your engine for too long
- Do not use a starter motor on Renault Kangoo 2 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your automobile, the energy it is capable of holding may not be good enough to furnish the power needed by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not treat the reason of your failure to start repeatedly, your starter may be the future component you will have to swap.
I listen noises from the starter motor of my Renault Kangoo 2, what are the triggers?
I encounter a loud noise from the starter of my Renault Kangoo 2
If you listen to a starter motor noise on Renault Kangoo 2 and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the origin of it. Indeed, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be ideal, in which circumstance the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is the part responsible of the starter motor noise on your Renault Kangoo 2 change it.
If it is a noise in the front of your automobile but it seems to you after reviewing not to come from your starter, consult this article about front end noise on Renault Kangoo 2 which may provide you other leads to eliminate your noise trouble.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Renault Kangoo 2
If you listen a clicking noise at the starter motor of your Renault Kangoo 2, there are two possible failures associated with this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a trouble with unplugged cable verify your electrical installation. If after examining this clicking noise on Renault Kangoo 2 doesn’t come from your starter motor, check this article for more informations.
