It is never pleasant to listen to a sound on your car that you don’t know where it comes from. You may be thinking about what to do when you find a reversing gear noise that remains on your Land Rover Range Rover Evoque? Any gearbox problem can be critical, but before making sure, it is better to do a few inspections. Our team has written this article to support you solve it. First, we will see what the sources and the different gearbox noises can be on Land Rover Range Rover Evoque, and second, what are the solutions available to you.
Classical reverse Land Rover Range Rover Evoque noises and some tips to maintain your gearbox
Why does the reversing of my Land Rover Range Rover Evoque make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The noise induced by the reversing of your Land Rover Range Rover Evoque is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. Indeed, the pressure you will apply on the gears will be monumental and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely common if you perceive a reverse noise on your Land Rover Range Rover Evoque if you shift gear under these conditions.
Different Land Rover Range Rover Evoque reversing noises and their causes
Finally in this section, we will move on to what you are probably most enthusiastic about in this page, to learn about the source of reversing noise on Land Rover Range Rover Evoque. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you listen to a grinding noise when you start in reverse with your Land Rover Range Rover Evoque, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check this article for more details about strut mount noises on Land Rover Range Rover Evoque.
An increased reverse knocking noise on Land Rover Range Rover EvoqueX
If you are subject to a knocking noise when you are in reverse with your Land Rover Range Rover Evoque and this noise tends to build up as you gain speed. It is possible that you are confronting a serious problem that needs to be resolved rather quickly before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your car to your repair shop quickly or browse this content page about gearbox noise on Land Rover Range Rover Evoque for more details.
I discover a noise when I go in reverse
Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Land Rover Range Rover Evoque reverse gear makes more noise than before, it is possible that filings have been made and are moving around in it. It is therefore time to empty the box.
