It is never enjoyable to hear a sound on your vehicle that you don’t know where it comes from. You may be wondering what to do when you find a reversing gear noise that lasts on your Audi A4? Any gearbox issue can be critical, but before making sure, it is better to do a few inspections. Our team has made this article to support you deal with it. First, we will see what the origins and the different gearbox noises can be on Audi A4, and second, what are the solutions available to you.
Classical reverse Audi A4 noises and some tips to preserve your gearbox
Why does the reversing of my Audi A4 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult action. The sound induced by the reversing of your Audi A4 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. Indeed, the pressure you will apply on the gears will be enormous and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you find out a reverse noise on your Audi A4 if you shift gear under these conditions.
Different Audi A4 reversing noises and their causes
Finally in this section, we will move on to what you are probably most interested in this document, to learn about the origin of reversing noise on Audi A4. Here are the 3 typical noises you may be victim of.
I hear a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Audi A4, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check out this content for more details about strut mount noises on Audi A4.
An increased reverse knocking noise on Audi A4X
If you are subject to a knocking noise when you are in reverse with your Audi A4 and this noise tends to build up as you gain speed. It is conceivable that you are confronting a serious issue that needs to be resolved right away before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your vehicle to your mechanic quickly or check out this document about gearbox noise on Audi A4 for more data.
I find out a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Audi A4 reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.