It is never pleasurable to hear a sound on your automobile that you don’t know where it comes from. You may be thinking what to do when you detect a reversing gear noise that lasts on your Audi Sq5? Any gearbox problem can be important, but before making sure, it is better to do a few inspections. Our team has made this article to help you fix it. First, we will see what the sources and the different gearbox noises can be on Audi Sq5, and second, what are the solutions available to you.
Classical reverse Audi Sq5 noises and some tips to maintain your gearbox
Why does the reversing of my Audi Sq5 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The sound created by the reversing of your Audi Sq5 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will put in on the gears will be monumental and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you hear a reverse noise on your Audi Sq5 if you shift gear under these conditions.
Different Audi Sq5 reversing noises and their causes
Finally in this section, we will move on to what you are probably most excited about in this document, to find out about the source of reversing noise on Audi Sq5. Here are the 3 typical sounds you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Audi Sq5, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check this article for more information about strut mount noises on Audi Sq5.
An increased reverse knocking noise on Audi Sq5X
If you are subject to a knocking noise when you are in reverse with your Audi Sq5 and this noise tends to build up as you gain speed. It is conceivable that you are experiencing a serious problem that needs to be solved as soon as possible before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears very fast. Take your automobile to your auto mechanic quickly or read this content about gearbox noise on Audi Sq5 for more data.
I find out a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Audi Sq5 reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
