Frequently experiencing noises from your vehicle is never relaxing, so experiencing wiper sounds on your Toyota Corolla can be worrying. This manifestation may be an indication of a moderate trouble as well as a warning of a moderate repair to come. No matter the reason, it is imperative to examine the origin and take the necessary measures to correct the trouble, it is with this in mind that we decided to compose this article to support you see more clearly. We will first look into the possible causes and solutions for dealing with noise from your wipers on your Toyota Corolla. Then, in a second step, we will give you some recommendations to prevent this type of noise from happening again.
Wiper blades that generates a squeaking or rubbing noise on Toyota Corolla
A wiper noise on your Toyota Corolla, whether it is a squeak noise or rather a rubbing noise on your windshield, is not relaxing and can distract your focus while you are driving. It is fundamental to fix such a noise. Also, a wiper blade noise is usually the indicator of a future malfunction of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Explanations and solutions for wiper noise on your Toyota Corolla
- Examine the wear of your wiper blades. This is the most general origin of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Consider swapping them in both circumstances.
- Dirty windshield, verify the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may hear a wiper noise on your Toyota Corolla, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very practical.
- Examine that your wiper blades are well placed. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Examine the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Toyota Corolla appears.
Some basic recommendations to limit wiper blades noise on your Toyota Corolla
Finally, we will give you some suggestions and warnings to help you extend the life of your wipers and avoid unwanted noise they may provoke during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, additionally if you wanted to use it for this goal, you would have to rinse abundantly because it makes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. In fact, this oily film will create a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise made by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or deteriorate to your windshield wipers.
