Repeatedly finding out noises from your car is never relaxing, so finding out wiper sounds on your Dodge Journey can be stressing. This sign may be an indicator of a insignificant problem as well as a warning of a insignificant repair to come. No matter the reason, it is imperative to check the origin and take the necessary actions to correct the problem, it is with this in mind that we wanted to write this article content to support you see more clearly. We will first take a look at the plausible reasons and solutions for dealing with noise from your wipers on your Dodge Journey. Then, in a second step, we will give you some suggestions to prevent this type of noise from going on again.
Wiper blades that makes a squeaking or rubbing noise on Dodge Journey
A wiper noise on your Dodge Journey, whether it is a squeak noise or rather a rubbing noise on your windshield, is not relaxing and can distract your focus while you are driving. It is crucial to stop such a sound. Also, a wiper blade noise is generally the signal of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Explanations and solutions for wiper noise on your Dodge Journey
- Check the wear of your wiper blades. This is the most common cause of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Consider swapping them in both circumstances.
- Dirty windshield, check the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may notice a wiper noise on your Dodge Journey, it is up to you to clean it with your windshield washer fluid if suitable, otherwise use sodium bicarbonate to clean it, it is very practical.
- Check that your wiper blades are well positioned. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can check these two points.
- Check the tightness of the wiper arm system and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Dodge Journey shows up.
Some general suggestions to limit wiper blades noise on your Dodge Journey
To finish , we will give you some recommendations and warnings to help you expand the life of your wipers and prevent unwanted noise they may create during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, additionally if you wanted to use it for this objective, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. In fact, this oily film will generate a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise made by your windshield wipers, we encourage you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or destroy to your windshield wipers.
