Constantly experiencing noises from your vehicle is never pleasant, so experiencing wiper sounds on your Chevrolet Cobalt can be distressing. This indicator may be a symptom of a slight trouble as well as a warning of a slight service to come. No matter the reason, it is necessary to check the source and take the necessary actions to solve the trouble, it is with this in mind that we decided to create this content to support you see more clearly. We will first look into the plausible reasons and solutions for dealing with noise from your wipers on your Chevrolet Cobalt. Then, in a second step, we will give you some recommendations to prevent this type of noise from going on again.
Wiper blades that causes a squeaking or rubbing noise on Chevrolet Cobalt
A wiper noise on your Chevrolet Cobalt, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your concentration while you are driving. It is important to fix such a sound. Also, a wiper blade noise is commonly the signal of a future malfunction of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Causes and solutions for wiper noise on your Chevrolet Cobalt
- Check the wear of your wiper blades. This is the most common trigger of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Consider changing them in both situations.
- Dirty windshield, check the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may acknowledge a wiper noise on your Chevrolet Cobalt, it is up to you to clean it with your windshield washer fluid if appropriate, otherwise use sodium bicarbonate to clean it, it is very effective.
- Check that your wiper blades are well installed. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can check these two points.
- Check the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Chevrolet Cobalt comes out.
Some typical recommendations to limit wiper blades noise on your Chevrolet Cobalt
Finally, we will give you some recommendations and warnings to help you expand the life of your wipers and prevent unwanted noise they may trigger during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, in addition if you wanted to use it for this reason, you would have to rinse abundantly because it causes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. In fact, this oily film will create a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main explanation for the noise generated by your windshield wipers, we advise you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or destroy to your windshield wipers.
