It is never pleasing to discover new sounds on your car. We generally will be anxious and think about the most extreme. But finding out wheel noise on Renault Trafic 3 is very often related to small concerns that you can easily eliminate. To support you in this examination, our team decided to produce this content to make your life easier and help you in this task. To do this, we will alternately see what are the distinctive noises that Renault Trafic 3 wheels can create and to which failures they are associated.wheel-noise-renault-trafic-3

The different wheel noises on Renault Trafic 3 and their sources

We will therefore focus on the different types of sound you may experience and their sources.

I perceive grinding wheel noise on Renault Trafic 3 from, cardan shaft

The first possibility of grinding wheel noise on your Renault Trafic 3 is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also conceivable that you may experience this sound when you pass over speed bumps. You should notice a noise close to a cracking . It is quite conceivable in this circumstance that one or more bellows of your gimbals are dead. In this case, the joint must be injured and the transmission may fail. Check the state of the joint bellows and replace them if necessary or risk having your car immobilized. If they have cracks, they will promptly dry out and fill with dust or stones that will rather quickly damage the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the origin of it, read this guide about suspension noise on Renault Trafic 3 to help you find a solution.

I notice a wheel noise Renault Trafic 3 when coasting caused by a bearing

One of the other probable triggers of signs on the front wheel of your Renault Trafic 3 when coasting, may be that one of your bearing is good to be swapped, it will tend to generate a thumping sound that intensifies when it is stressed (turns faster and faster). So don’t forget to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case replace it or them before long. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide about loud noises on Renault Trafic 3, you will most likely find a resolution to your trouble.

I find out a wheel noise Renault Trafic 3 caused by brakes

If you experience noise from one or both of your wheels, it is highly conceivable that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will generate a loud metallic sound that you will undoubtedly notice. To verify this, put your car on axle stands, and verify the state of your discs and pads by taking out the wheel. If they are involved, replace them as soon as possible , otherwise you will no longer be able to brake. If you experience a metallic noise from your Renault Trafic 3, but the brakes are not the cause, browse this guide for more information on this trouble.

I experience a wheel noise Renault Trafic 3 caused by faulty wheel alingment

If you experience a sound that may be like a vibration and will intensify as you increase speed, it is conceivable that your wheel alingment or balancing is the reason of it. Wheel alingment of a car is an important step that is generally done after each tire change. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and create a significant wheel noise on Renault Trafic 3. Check that your seals are still set up, otherwise go to your garage.

I hear a wheel noise Renault Trafic 3 connected to wishbone

Finally, you may feel a noise on your Renault Trafic 3 at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this trouble comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone while accelerating when it will be pushed on side and the automobile will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your mechanic.