It is never pleasant to find out new noises on your vehicle. We always tend to be anxious and think about the worst. But hearing wheel noise on Fiat Panda 2 is very often linked to small concerns that you can easily eliminate. To support you in this inspection, our team decided to write this paper to make your life easier and help you in this challenge. To do this, we will alternately see what are the distinctive noises that Fiat Panda 2 wheels can provoke and to which malfunctions they are associated.
The different wheel noises on Fiat Panda 2 and their origins
We will therefore look into the different types of noise you may encounter and their triggers.
I experience grinding wheel noise on Fiat Panda 2 from, cardan shaft
The first possibility of grinding wheel noise on your Fiat Panda 2 is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also plausible that you may encounter this noise when you drive over speed bumps. You should experience a noise close to a cracking . It is quite plausible in this case that one or more bellows of your gimbals are dead. In this case, the joint must be destroyed and the transmission may fail. Check the condition of the joint bellows and swap them if necessary or risk having your vehicle immobilized. If they have holes, they will rather quickly dry out and fill with dust or stones that will promptly harm the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not responsible, have a look at this guide about suspension noise on Fiat Panda 2 to help you find a solution.
I perceive a wheel noise Fiat Panda 2 when coasting attributable to a bearing
One of the other potential causes of symptoms on the front wheel of your Fiat Panda 2 when coasting, may be that one of your bearing is good to be replaced, it will tend to produce a thumping noise that intensifies when it is stressed (turns faster and faster). So make sure to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them as soon as possible. If, on the other hand, this noise only shows up itself with an engaged speed, have a look at this guide about loud noises on Fiat Panda 2, you will most likely find a resolution to your trouble.
I find out a wheel noise Fiat Panda 2 attributable to brakes
If you perceive noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will generate a loud metallic noise that you will surely notice. To verify this, put your vehicle on axle stands, and control the condition of your discs and pads by taking off the wheel. If they are involved, swap them in short order , otherwise you will no longer be able to brake. If you encounter a metallic noise from your Fiat Panda 2, but the brakes are not the cause, read this guide for more information on this trouble.
I find out a wheel noise Fiat Panda 2 linked to faulty wheel alingment
If you encounter a noise that may be like a vibration and will increase as you increase speed, it is plausible that your wheel alingment or balancing is the origin of it. Wheel alingment of a vehicle is an important step that is generally done after each tire swap. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and provoke a significant wheel noise on Fiat Panda 2. Check that your seals are still in position, otherwise go to your mechanic.
I hear a wheel noise Fiat Panda 2 linked to wishbone
Finally, you may have a noise on your Fiat Panda 2 at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this trouble comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone during the acceleration phases when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto technician.
