Do you listen to a metallic noise on your Fiat Panda 2 when ever you drive? We understand that this is not pleasurable and that you are wandering. Experiencing such a noise is not always a good indicator, but it may also be nothing major. To support you fix this issue, our team has decided to write this content to assist you in this investigation. In order to execute this research as efficiently as possible, we will first take a look at the plausible sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Fiat Panda 2 coming from the front end of the vehicle
I perceive a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise manifestations on your Fiat Panda 2, may be that one of your bearing is tired, it will commonly generate a loud noise that increase when stressed (turns faster and faster). So remember to check by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well based here, if this is the case swap it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this guide on loud noise on Fiat Panda 2, you will most likely find a solution to your issue.
If you experience a metalic noise on Fiat Panda 2 and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will create a strong metallic rubbing noise that you will inevitably feel. To check this, put your vehicle on safety stand, and check the condition of your discs and pads by taking out the wheel. If they are involved, swap them quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your vehicle, and you want infos about it, go through this guide for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Fiat Panda 2, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To check this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we encourage that you consult this content for a complete guide about steering noises on Fiat Panda 2.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Fiat Panda 2. Once screwed up, they will no longer fulfill their purpose as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, bear in mind to check their status and swap them if required. Feel free to consult this content which is a complete file about strut mounts noises on Fiat Panda 2, how to check their condition and change them.
Finally, the last common reason of metallic noise on Fiat Panda 2. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we encourage that you look at this detailed guide on the origins of steering noises on Fiat Panda 2.
Metallic noise Fiat Panda 2 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you discern an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. Indeed, it is plausible that either the catalyst or the silencer may be the reason of this noise. To be certain, go under the vehicle, cold, and knock each of the previously stated components with a hammer to find the source of the noise. You should perceive things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to consider replacing it, as well as the silencer. In such a case, to eliminate the metallic noise on your Fiat Panda 2, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is plausible that with wear they are at the origin of your metallic noises on your Fiat Panda 2. Go a little further up in the content where you will find information of the solution already exposed for the front part of the vehicle.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
