You notice a starter motor noise on your Suzuki Alto every time you start your automobile. We can understand that this is not pleasant and that you have questions. Hearing such a noise is not always a good signal, but it may also be nothing major. To help you remedy this trouble, our team has chosen to compose this article to help you in this research. First, we will describe how the starter motor works on your Suzuki Alto, and then what starter motor noises you can notice on your Suzuki Alto.
Functioning and various information
Function of a starter motor on Suzuki Alto
The starter motor is an electric motor whose single job is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Suzuki Alto is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Suzuki Alto
- Do not try to start your engine for too long
- Do not use a starter motor on Suzuki Alto with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be sufficient to generate the power expected by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not correct the cause of your failure to start repeatedly, your starter may be the future component you will have to replace.
I notice noises from the starter motor of my Suzuki Alto, what are the reasons?
I feel a loud noise from the starter of my Suzuki Alto
If you notice a starter motor noise on Suzuki Alto and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be appropriate, in which circumstance the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Examine the condition of the drive pinion, if it is the component resposible of the starter motor noise on your Suzuki Alto swap it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, consult this article about front end noise on Suzuki Alto which may provide you other leads to remedy your noise trouble.
I notice a clicking noise of the key running in my neiman but no noise at the starter motor of my Suzuki Alto
If you notice a clicking noise at the starter motor of your Suzuki Alto, there are two possible failures relating to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a trouble with unplugged cable check your electrical installation. If after examining this clicking noise on Suzuki Alto doesn’t come from your starter motor, check this article for more informations.
