Being subject to frequent noise on your car tends to be frustrating, a car is so sophisticated that it is generally difficult to situate its origin and even more so to find the part that causes it. If you have already experienced a clicking noise on your Suzuki Alto, we will almost certainly be able to help you. Indeed, our editorial staff decided to create this document in order to review the main causes of a clicking noise on Suzuki Alto. This is why, firstly, we will look at what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the sources of clicking noise on Suzuki Alto coming from your suspensions.
I perceive a clicking noise on Suzuki Alto on my engine
Verify your high engine
If you perceive a clicking noise on Suzuki Alto, and this sound is based at the top of the engine, it means that it comes from your cylinder head and its associated parts. Two parts can be the causes of these ticking noises on Suzuki Alto. Either the hydraulic pushers , in general it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, often when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this case, remember to change them.
Verify your low engine
If you have determined the region of source of the Suzuki Alto clikcing noises coming from your low engine, it may be that your rods or piston shafts are the causes. In both situations, the risk in the long term is the breakage of the motor. These two repairs are very complex and most mechanics will advise you to swap the engine of your Suzuki Alto.
Combustion problem
Finally, if you have the feeling that this clicking noise on Suzuki Alto is connected to the combustion of your engine, there are three possible origins of it. Verify the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is conceivable that your timing belt is shifted and that it does not properly manage the timing of the various engine elements to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are destroyed. In this circumstance, do not hesitate to consult this document which deals in detail with the different injection sounds on Suzuki Alto.
I perceive a clicking noise on Suzuki Alto in my direction
Verify the state of the gimbals
One of the most common triggers of a clicking noises in the direction of your Suzuki Alto is linked to the direction of the car. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be changed in a short time, otherwise the entire cardan shaft will have to be changed. Consider taking a look at it. If you would like more detailed information about gimbals noises on Suzuki Alto, do not hesitate to read this complete guide.
Verify the rest of your direction
Finally, when you find out a clicking noise on your Suzuki Alto, it is conceivable that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the circumstance, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I perceive a clicking noise on Suzuki Alto coming from my suspensions
Verify the suspension
If you experience a clicking noise on your Suzuki Alto each time you pass a speed bump, it is extremely conceivable that your suspension block is the induce of the sound. Indeed, it may be the suspension cups, which, when they are outdated, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its role and during small jolts that compress the suspensions. To check if this is the trouble that concerns you, take a dented road and, at low speed, listen to the sound coming from your front axle when ever you pass over holes. If these are the cups, consider changing them as soon as possible as this may damage other parts and require more expensive repairs.
Check spring and cylinder
If you are subject to a clicking noise on your Suzuki Alto at the suspension level, it is highly conceivable that spring wear or shock cylinder deformation may be a cause. To check the condition of the spring, position the vehicle on a flat surface and measure that the heights from the ground to the bottom of the body are similar on each side (empty car for measurement). You can also check between the front and rear, if there is a gap too significant it denotes that most likely your springs are worn, if you find out a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider swapping it or them. If you have the feeling that this noise is more like a squeaking noise on Suzuki Alto than a clicking noise, don’t hesitate to consult this article.
