You notice a starter motor noise on your Kia Xceed each time you start your automobile. We agree that this is not enjoyable and that you have questions. Experiencing such a sound is not always a good sign, but it may also be nothing major. To assist you fix this issue, our team has chosen to compose this content to help you in this research. First, we will explain how the starter motor works on your Kia Xceed, and then what starter motor noises you can discover on your Kia Xceed.starter-motor-noise-kia-xceed

Functioning and various information

Function of a starter motor on Kia Xceed

The starter motor is an electric motor whose sole job is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Kia Xceed is activated and turns the drive pinion on the flywheel to start the engine.

How to prevent starter motor noises on Kia Xceed

  • Do not try to start your engine for too long
  • Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn your starter motor. In fact, the current essential to make it turn and the speed of rotation only permits it to perform its function over very short and intense periods of time. If the car does not start, look for the solution elsewhere.

  • Do not use a starter motor on Kia Xceed with a tired battery
  • Although when you have a battery that is empty, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to give the power expected by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not treat the reason of your failure to start repeatedly, your starter may be the future part you will have to change.

I notice noises from the starter motor of my Kia Xceed, what are the causes?

I encounter a loud noise from the starter of my Kia Xceed

If you experience a starter motor noise on Kia Xceed and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. In fact, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which case the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is the component resposible of the starter motor noise on your Kia Xceed swap it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, check this content about front end noise on Kia Xceed which may give you other leads to eliminate your noise issue.

I notice a clicking noise of the key running in my neiman but no noise at the starter motor of my Kia Xceed

If you notice a clicking noise at the starter motor of your Kia Xceed, there are two possible failures linked to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a issue with unplugged cable verify your electrical installation. If after tracking this clicking noise on Kia Xceed doesn’t come from your starter motor, check this article for more informations.