You experience a starter motor noise on your Ford Explorer each time you start your car. We agree that this is not agreeable and that you have inquiries. Experiencing such a noise is not always a good indication, but it may also be nothing severe. To support you solve this trouble, our team has decided to create this content to support you in this research. First, we will detail how the starter motor functions on your Ford Explorer, and then what starter motor noises you can encounter on your Ford Explorer.
Functioning and various information
Function of a starter motor on Ford Explorer
The starter motor is an electric motor whose single role is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ford Explorer is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Ford Explorer
- Do not try to start your engine for too long
- Do not use a starter motor on Ford Explorer with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is tired, you always want to start your vehicle, the energy it is capable of holding may not be enough to provide the power needed by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not solve the cause of your failure to start repeatedly, your starter may be the future element you will have to replace.
I experience noises from the starter motor of my Ford Explorer, what are the origins?
I encounter a loud noise from the starter of my Ford Explorer
If you perceive a starter motor noise on Ford Explorer and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Examine the condition of the drive pinion, if it is the part responsible of the starter motor noise on your Ford Explorer change it.
If it is a noise in the front of your vehicle but it seems to you after examining not to come from your starter, check this content about front end noise on Ford Explorer which may give you other leads to solve your noise trouble.
I experience a clicking noise of the key running in my neiman but no noise at the starter motor of my Ford Explorer
If you experience a clicking noise at the starter motor of your Ford Explorer, there are two possible failures related to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a trouble with unplugged cable verify your electrical installation. If after tracking this clicking noise on Ford Explorer doesn’t come from your starter motor, check this article for more informations.
