You acknowledge a starter motor noise on your Dodge Nitro each time you start your automobile. We agree that this is not enjoyable and that you have questions. Hearing such a sound is not always a good signal, but it may also be nothing severe. To assist you remedy this problem, our team has chosen to compose this content page to assist you in this research. First, we will detail how the starter motor works on your Dodge Nitro, and then what starter motor noises you can experience on your Dodge Nitro.
Functioning and various information
Function of a starter motor on Dodge Nitro
The starter motor is an electric motor whose sole job is to start the engine of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Dodge Nitro is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Dodge Nitro
- Do not run your starter too long
- Do not use a starter motor on Dodge Nitro with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be good enough to generate the power expected by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not deal with the cause of your failure to start repeatedly, your starter may be the future element you will have to replace.
I acknowledge noises from the starter motor of my Dodge Nitro, what are the triggers?
I feel a loud noise from the starter of my Dodge Nitro
If you perceive a starter motor noise on Dodge Nitro and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be ideal, in which situation the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Verify the condition of the drive pinion, if it is the part responsible of the starter motor noise on your Dodge Nitro swap it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, check this content page about front end noise on Dodge Nitro which may provide you other leads to fix your noise problem.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Dodge Nitro
If you acknowledge a clicking noise at the starter motor of your Dodge Nitro, there are two possible failures linked to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a problem with unplugged cable check your electrical installation. If after checking out this clicking noise on Dodge Nitro doesn’t come from your starter motor, check this article for more informations.
