You experience a starter motor noise on your Dodge Durango every time you start your car. We can understand that this is not agreeable and that you have questions. Hearing such a sound is not always a good signal, but it may also be nothing major. To assist you resolve this issue, our team has decided to prepare this content page to assist you in this research. First, we will explain how the starter motor works on your Dodge Durango, and then what starter motor noises you can discover on your Dodge Durango.
Functioning and various information
Function of a starter motor on Dodge Durango
The starter motor is an electric motor whose only function is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Dodge Durango is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Dodge Durango
- Do not try to start your engine for too long
- Do not use a starter motor on Dodge Durango with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is exhausted, you always want to start your car, the energy it is capable of holding may not be enough to furnish the power demanded by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not fix the origin of your failure to start repeatedly, your starter may be the future part you will have to change.
I experience noises from the starter motor of my Dodge Durango, what are the causes?
I encounter a loud noise from the starter of my Dodge Durango
If you hear a starter motor noise on Dodge Durango and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be optimal, in which case the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Check the state of the drive pinion, if it is the component resposible of the starter motor noise on your Dodge Durango replace it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, check this content page about front end noise on Dodge Durango which may offer you other leads to remedy your noise issue.
I experience a clicking noise of the key running in my neiman but no noise at the starter motor of my Dodge Durango
If you experience a clicking noise at the starter motor of your Dodge Durango, there are two possible failures related to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a issue with unplugged cable check your electrical installation. If after looking at this clicking noise on Dodge Durango doesn’t come from your starter motor, check this article for more informations.
