Being subject to frequent noise on your car tends to be frustrating, a car is so sophisticated that it is generally difficult to situate its origin and even more so to find the part that produces it. If you have already experienced a clicking noise on your Dodge Durango, we will almost certainly be able to support you. Indeed, our editorial staff decided to create this article in order to review the main causes of a clicking noise on Dodge Durango. This is why, firstly, we will check out what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Dodge Durango coming from your suspensions.
I notice a clicking noise on Dodge Durango located on my engine
Verify your high engine
If you notice a clicking noise on Dodge Durango, and this sound is located at the top of the engine, it means that it originates from your cylinder head and its accompanying parts. Two elements can be the triggers of these ticking noises on Dodge Durango. Either the hydraulic pushers , generally it is because of their faulty “hydraulic catch-up” system that we will hear these clicking noises, often when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this case, remember to change them.
Verify your low engine
If you have determined the area of origin of the Dodge Durango clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both cases, the risk in the long term is the breakage of the motor. These two maintenance are very complex and most mechanics will advise you to change the engine of your Dodge Durango.
Combustion problem
Finally, if you have the feeling that this clicking noise on Dodge Durango is connected to the combustion of your engine, there are three possible reasons of it. Verify the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine elements to promote good combustion. And finally, the most classic cause, comes from your injection, which is either blocked or one or more injectors are damaged. In this circumstance, do not hesitate to check this article which deals in detail with the different injection sounds on Dodge Durango.
I notice a clicking noise on Dodge Durango in my direction
Verify the state of the gimbals
One of the most regular triggers of a clicking noises in the direction of your Dodge Durango is linked with the direction of the car. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can generate a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be changed very quickly, otherwise the entire cardan shaft will have to be changed. Consider taking a look at it. If you would like more detailed information about gimbals noises on Dodge Durango, do not hesitate to read this complete guide.
Verify the rest of your direction
Finally, when you recognise a clicking noise on your Dodge Durango, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the circumstance, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I notice a clicking noise on Dodge Durango coming from my suspensions
Verify the suspension
If you encounter a clicking noise on your Dodge Durango when you pass a speed bump, it is highly possible that your suspension block is the induce of the sound. Indeed, it may be the suspension cups, which, when they are outdated, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its task and during small jolts that compress the suspensions. To verify if this is the problem that worries you, take a dented road and, at low speed, listen to the sound coming from your front axle when ever you pass over holes. If these are the cups, consider changing them as soon as possible as this may damage other parts and require more expensive repairs.
Check spring and cylinder
If you are subject to a clicking noise on your Dodge Durango at the suspension level, it is highly possible that spring wear or shock cylinder deformation may be a cause. To verify the condition of the spring, place the vehicle on a flat surface and measure that the heights from the ground to the bottom of the body are equivalent on each side (empty car for measurement). You can also verify between the front and rear, if there is a gap too significant it suggests that that most likely your springs are worn, if you observe a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider replacing it or them. If you have the feeling that this noise is more like a squeaking noise on Dodge Durango than a clicking noise, don’t hesitate to consult this article.
