It is never pleasant to find out a noise from your car you don’t know where from. Thus what if you identify a serpentine belt noise that stays on your Volkswagen Touran 3? It is highly plausible that this is a insignificant issue, but before being sure, it is better to accomplish some checks. If this belt noise comes from your serpentine or driving belt, our team has written an article to support you finding and solving it. First, we will look at the serpentine belt noises on your Volkswagen Touran 3 and then we will check out the origins of these noises.
I encounter noises from serpentine belt Volkswagen Touran 3
The best strategy to control the state of your belts is to listen to your automobile. Immediately after you recognise noises such as squealing or bells, you should take a closer look to check their source. The role of the serpentine belt or driving belt of your Volkswagen Touran 3 is to transfer the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal general performance of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine components at variable speeds.
I find out squealing noises on my serpentine belt Volkswagen Touran 3
This type of squealing belt noises on Volkswagen Touran 3, which will often be acute, can in most cases appear when the engine is cold, or when the acceleration increases in intensity. . This type of noise must be significant and it is normally quite simple to associate it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being accessible, it should not be too complicated for you to identify a belt noise on your Volkswagen Touran 3. The reason of this issue can be connected to the damper pulley, which works as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this phenomenon is annodine. As the serpentine belt of your Volkswagen Touran 3 is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Remember to check the state of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises Volkswagen Touran 3
Just like squealing, a driving belt noise on your Volkswagen Touran 3 that sounds like a loud grinding sound can express a lot about its state. It is therefore necessary that you look further and locate the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this issue. Remember to check first the serpentine/driving belt which in most cases is the reason of this issue, otherwise it will be necessary to replace the tensioner or pulley.
I find out bearing noises on the serpentine belt of my Volkswagen Touran 3
Finally, if in your case you identify a bearing belt noise on Volkswagen Touran 3, it is plausible that it is connected to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Volkswagen Touran 3 which could maybe help you.
