It is never pleasurable to discover a noise from your car you don’t know where from. Then what if you discover a serpentine belt noise that stays on your Ram P/U? It is very plausible that this is a minimal problem, but before being sure, it is better to accomplish some checks. If this belt noise comes from your serpentine or driving belt, our team has written a content to support you finding and correcting it. First, we will look at the serpentine belt noises on your Ram P/U and then we will take a look at the origins of these sounds.
I feel noises from serpentine belt Ram P/U
The best technique to check the condition of your belts is to listen to your vehicle. As soon as you notice sounds such as squealing or bells, you should take a closer look to examine their origin. The function of the serpentine belt or driving belt of your Ram P/U is to transmit the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal general performance of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine parts at variable speeds.
I discover squealing noises on my serpentine belt Ram P/U
This kind of squealing belt noises on Ram P/U, which will often be acute, can mostly appear when the engine is cold, or when the acceleration increases in intensity. . This kind of noise must be heavy and it is often quite simple to relate it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being accessible, it should not be too complicated for you to point a belt noise on your Ram P/U. The cause of this problem can be connected to the damper pulley, which operates as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this phenomenon is annodine. As the serpentine belt of your Ram P/U is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to examine the condition of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I discover loud serpentine or driving belt noises Ram P/U
Just like squealing, a driving belt noise on your Ram P/U that sounds like a loud grinding sound can express a lot about its condition. It is therefore imperative that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Don’t forget to examine first the serpentine/driving belt which in most cases is the cause of this problem, otherwise it will be necessary to replace the tensioner or pulley.
I discover bearing noises on the serpentine belt of my Ram P/U
Finally, if in your case you identify a bearing belt noise on Ram P/U, it is plausible that it is connected to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses possibilities, you still notice a belt noises, read our article about timing belt noises on Ram P/U which could maybe help you.
