It is never pleasant to discover a noise from your car you don’t know where from. Then what if you locate a serpentine belt noise that lasts on your Land Rover Discovery? It is extremely conceivable that this is a minimal issue, but before being sure, it is better to carry out some inspections. If this belt noise comes from your serpentine or driving belt, our team has written a document to support you finding and correcting it. First, we will look at the serpentine belt noises on your Land Rover Discovery and then we will check out the origins of these noises.
I experience noises from serpentine belt Land Rover Discovery
The best strategy to control the state of your belts is to listen to your car. Immediately after you notice noises such as squealing or bells, you should take a closer look to check their source. The function of the serpentine belt or driving belt of your Land Rover Discovery is to transfer the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal operation of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine components at variable speeds.
I discover squealing noises on my serpentine belt Land Rover Discovery
This sort of squealing belt noises on Land Rover Discovery, which will often be acute, can in most cases appear when the engine is cold, or when the acceleration increases in intensity. . This sort of sound must be heavy and it is often quite simple to connect it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being exposed, it should not be too complicated for you to point a belt noise on your Land Rover Discovery. The reason of this issue can be in connection with the damper pulley, which functions as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this event is annodine. As the serpentine belt of your Land Rover Discovery is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to check the state of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I discover loud serpentine or driving belt noises Land Rover Discovery
Just like squealing, a driving belt noise on your Land Rover Discovery that sounds like a loud grinding sound can reveal a lot about its state. It is therefore imperative that you look further and locate the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this issue. Make sure you check first the serpentine/driving belt which in most cases is the reason of this issue, otherwise it will be necessary to change the tensioner or pulley.
I discover bearing noises on the serpentine belt of my Land Rover Discovery
Finally, if in your case you recognize a bearing belt noise on Land Rover Discovery, it is conceivable that it is in connection with a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than suggested and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses possibilities, you still notice a belt noises, read our article about timing belt noises on Land Rover Discovery which could maybe help you.
