It is never pleasant to notice a noise from your car you don’t know where from. So what if you locate a serpentine belt noise that remains on your Kia Sedona? It is highly possible that this is a unimportant problem, but before being sure, it is better to conduct some verifications. If this belt noise comes from your serpentine or driving belt, our team has written a post to help you locating and correcting it. First, we will look at the serpentine belt noises on your Kia Sedona and then we will check out the origins of these noises.
I encounter noises from serpentine belt Kia Sedona
The best way to check the condition of your belts is to listen to your automobile. As soon as you recognise noises such as squealing or bells, you should take a closer look to check their source. The task of the serpentine belt or driving belt of your Kia Sedona is to transfer the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal overall performance of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine parts at variable speeds.
I notice squealing noises on my serpentine belt Kia Sedona
This sort of squealing belt noises on Kia Sedona, which will often be acute, can commonly arise when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be significant and it is often quite simple to link it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being visible, it should not be too difficult for you to locate a belt noise on your Kia Sedona. The reason of this problem can be connected to the damper pulley, which works as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this event is annodine. As the serpentine belt of your Kia Sedona is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Remember to check the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I notice loud serpentine or driving belt noises Kia Sedona
Just like squealing, a driving belt noise on your Kia Sedona that sounds like a loud grinding sound can say a lot about its condition. It is therefore important that you look further and find the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this problem. Remember to check first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to swap the tensioner or pulley.
I notice bearing noises on the serpentine belt of my Kia Sedona
Finally, if in your case you recognize a bearing belt noise on Kia Sedona, it is possible that it is connected to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Kia Sedona which could maybe help you.
