It is never relaxing to perceive a noise from your car you don’t know where from. Thus what if you identify a serpentine belt noise that stays on your GMC Canyon? It is extremely possible that this is a minor issue, but before being sure, it is better to carry out some verifications. If this belt noise comes from your serpentine or driving belt, our team has written a page to support you finding and repairing it. First, we will look at the serpentine belt noises on your GMC Canyon and then we will look at the origins of these noises.serpentine-belt-noise-gmc-canyon

I experience noises from serpentine belt GMC Canyon

The best way to check the state of your belts is to listen to your vehicle. Immediately after you recognize noises such as squealing or bells, you should take a closer look to examine their origin. The job of the serpentine belt or driving belt of your GMC Canyon is to transmit the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore vital in the normal use of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine components at variable speeds.

I perceive squealing noises on my serpentine belt GMC Canyon

This type of squealing belt noises on GMC Canyon, which will often be acute, can in most cases appear when the engine is cold, or when the acceleration increases in intensity. . This type of noise must be significant and it is normally quite simple to associate it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being accessible, it should not be too complicated for you to locate a belt noise on your GMC Canyon. The cause of this issue can be connected to the damper pulley, which operates as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this phenomenon is annodine. As the serpentine belt of your GMC Canyon is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Remember to examine the state of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.

I perceive loud serpentine or driving belt noises GMC Canyon

Just like squealing, a driving belt noise on your GMC Canyon that sounds like a loud grinding sound can reveal a lot about its state. It is therefore necessary that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Don’t forget to examine first the serpentine/driving belt which in most cases is the cause of this issue, otherwise it will be necessary to change the tensioner or pulley.

I perceive bearing noises on the serpentine belt of my GMC Canyon

Finally, if in your case you recognize a bearing belt noise on GMC Canyon, it is possible that it is connected to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses alternatives, you still identify a belt noises, read our article about timing belt noises on GMC Canyon which could maybe help you.