It is never pleasurable to perceive a noise from your car you don’t know where from. So what if you identify a serpentine belt noise that stays on your Ford Puma? It is extremely possible that this is a minimal trouble, but before being sure, it is better to conduct some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a document to support you locating and solving it. First, we will look at the serpentine belt noises on your Ford Puma and then we will check out the origins of these noises.
I experience noises from serpentine belt Ford Puma
The best strategy to check the condition of your belts is to listen to your automobile. Immediately after you find noises such as squealing or bells, you should take a closer look to check their origin. The job of the serpentine belt or driving belt of your Ford Puma is to transfer the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal overall performance of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive distinctive engine elements at variable speeds.
I perceive squealing noises on my serpentine belt Ford Puma
This type of squealing belt noises on Ford Puma, which will often be acute, can generally occur when the engine is cold, or when the acceleration increases in intensity. . This type of noise must be heavy and it is normally quite simple to link it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being exposed, it should not be too difficult for you to spot a belt noise on your Ford Puma. The cause of this trouble can be related to the damper pulley, which acts as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this phenomenon is annodine. As the serpentine belt of your Ford Puma is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Keep in mind to check the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I perceive loud serpentine or driving belt noises Ford Puma
Just like squealing, a driving belt noise on your Ford Puma that sounds like a loud grinding sound can reveal a lot about its condition. It is therefore essential that you look further and find the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this trouble. Make sure you check first the serpentine/driving belt which in most cases is the cause of this trouble, otherwise it will be necessary to change the tensioner or pulley.
I perceive bearing noises on the serpentine belt of my Ford Puma
Finally, if in your case you distinguish a bearing belt noise on Ford Puma, it is possible that it is related to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses alternatives, you still identify a belt noises, read our article about timing belt noises on Ford Puma which could maybe help you.
