It is never pleasurable to perceive a noise from your car you don’t know where from. Thus what if you identify a serpentine belt noise that remains on your Chevrolet Trax? It is extremely conceivable that this is a minor issue, but before being sure, it is better to execute some verifications. If this belt noise comes from your serpentine or driving belt, our team has written an article to help you locating and solving it. First, we will look at the serpentine belt noises on your Chevrolet Trax and then we will take a look at the sources of these sounds.
I encounter noises from serpentine belt Chevrolet Trax
The best method to check the state of your belts is to listen to your vehicle. Immediately after you detect sounds such as squealing or bells, you should take a closer look to check their origin. The job of the serpentine belt or driving belt of your Chevrolet Trax is to transmit the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore essential in the normal functionality of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine elements at variable speeds.
I perceive squealing noises on my serpentine belt Chevrolet Trax
This sort of squealing belt noises on Chevrolet Trax, which will often be acute, can mostly appear when the engine is cold, or when the acceleration increases in intensity. . This sort of sound must be significant and it is normally quite simple to associate it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too complicated for you to identify a belt noise on your Chevrolet Trax. The cause of this issue can be linked to the damper pulley, which acts as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this event is annodine. As the serpentine belt of your Chevrolet Trax is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to check the state of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I perceive loud serpentine or driving belt noises Chevrolet Trax
Just like squealing, a driving belt noise on your Chevrolet Trax that sounds like a loud grinding sound can say a lot about its state. It is therefore important that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Don’t forget to check first the serpentine/driving belt which in most cases is the cause of this issue, otherwise it will be necessary to replace the tensioner or pulley.
I perceive bearing noises on the serpentine belt of my Chevrolet Trax
Finally, if in your case you identify a bearing belt noise on Chevrolet Trax, it is conceivable that it is linked to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than suggested and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses alternatives, you still detect a belt noises, read our article about timing belt noises on Chevrolet Trax which could maybe help you.
