It is never pleasurable to listen to a noise from your car you don’t know where from. Thus what if you identify a serpentine belt noise that stays on your Chevrolet Traverse? It is extremely conceivable that this is a insignificant trouble, but before being sure, it is better to accomplish some checks. If this belt noise comes from your serpentine or driving belt, our team has written an article to help you finding and correcting it. First, we will look at the serpentine belt noises on your Chevrolet Traverse and then we will check out the sources of these sounds.
I encounter noises from serpentine belt Chevrolet Traverse
The best method to control the state of your belts is to listen to your automobile. Immediately after you find sounds such as squealing or bells, you should take a closer look to examine their source. The function of the serpentine belt or driving belt of your Chevrolet Traverse is to transmit the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal overall performance of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine parts at variable speeds.
I listen to squealing noises on my serpentine belt Chevrolet Traverse
This sort of squealing belt noises on Chevrolet Traverse, which will often be acute, can commonly appear when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be heavy and it is often quite simple to connect it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being visible, it should not be too complicated for you to locate a belt noise on your Chevrolet Traverse. The reason of this trouble can be linked to the damper pulley, which functions as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this event is annodine. As the serpentine belt of your Chevrolet Traverse is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to examine the state of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I listen to loud serpentine or driving belt noises Chevrolet Traverse
Just like squealing, a driving belt noise on your Chevrolet Traverse that sounds like a loud grinding sound can tell you a lot about its state. It is therefore imperative that you look further and find the reason for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this trouble. Remember to examine first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to swap the tensioner or pulley.
I listen to bearing noises on the serpentine belt of my Chevrolet Traverse
Finally, if in your case you distinguish a bearing belt noise on Chevrolet Traverse, it is conceivable that it is linked to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses possibilities, you still notice a belt noises, read our article about timing belt noises on Chevrolet Traverse which could maybe help you.
