Hearing noises from your car is never enjoyable. Especially persistent noises such as rubbing noises on Dodge Avenger that will disturb you and prevent you from cruising in the normal quiet environment that your car gives you. If you hear rubbing noise on Dodge Avenger, you are in the right place, our team has decided to create this article to support you find the source and stop it. This is why, first of all, we will look into the rubbing noises that can show up when you drive with your Dodge Avenger, and secondly, the rubbing noises that originate from your engine block.
I hear a rubbing noise on Dodge Avenger when I drive
Noise of rubbing from wheels
First, we will focus on rubbing noises that can be due to wheel, be aware that in this content page we will only investigate the most common causes of rubbing noises on Dodge Avenger connected with your wheels, if you need a full guide on wheel noise on Dodge Avenger, it’s here.
- Rubbing noise caused by your bearing
- Brake noise
One of the other possible causes of rubbing noise manifestations on your Dodge Avenger, may be that one of your bearing is tired, it will frequently generate a loud noise that increases when stressed (turns faster and faster). So think about to verify by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well based here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on Ancre_loud_noise, you will most likely find a solution to your problem.
If you discern a rubbing noise on Dodge Avenger and you have the feeling that it comes from your wheels, it is highly conceivable that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To verify this, put your car on safety stand, and verify the condition of your discs and pads by removing the wheel. If they are involved, change them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want infos about it, browse this guide for more information about brake noises on Dodge Avenger.
Noise of rubbing from under the car
Finally, a rubbing noise on your Dodge Avenger from the lower part of the chassis may be connected to a poor attachment of your exhaust to your vehicle. Indeed, over time, vibrations, the pot fasteners on the car chassis can come off. In cases like this, you must verify, when cold, that the exhaust holds well, to perform this try to make it move in different directions and check out how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually verify the fasteners for which you have doubts. Finally, it is possible that a rubber mounts may have died . In such a case it will have to be replaced. If your exhaust is the cause of this exhaust noise on Dodge Avenger, but the silent blocks are not the reason, consult this guide to find the cause.
I hear a rubbing noise on Dodge Avenger coming from the engine
If it approaches an engine noise rubbing on Dodge Avenger, you may have one of the bearings of your engine accessory parts that is affected or, one of your belts are displaced or worn and trigger this friction.So check the condition and try to find the exact source of this noise by positioning someone at the engine at idle, and if this noise is more likely to show up in rpm, accelerate and position someone at the engine block to identify the area of source of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also bear in mind to verify the condition of your belts, and change them if needed because it is the health of your car that is at stake. If you encounter belt noises on Dodge Avenger, we suggest that you consult this article for more information on this subject.
