It occurs occasionally that your car makes noises from your brakes, you are certainly not reassured by this sort of noise and you instantly tend to think that you will have an incident or that the repair will cost you an astronomical sum. So, what if you identify noise from the brake on your Dodge Avenger? It may not be anything serious and you should have the capability to fix it on your own, but when in doubt, as with such problem your safety and the one from other is in question, it is better to check before a more serious failure happens. It is with this in mind that we have chosen to write this article and give you the chance to find out the problem and find a solution. We will go through different steps, review all plausible origins of brake noise on Dodge Avenger, and deliver you the reasons for them in order to help you fix the problem.
The different types of brake noise Dodge Avenger and their causes
The objective of the Dodge Avenger brakes is to come slow down and stop your car. This component is an essential element of your vehicule’s safety. Experiencing a noise from it must therefore be examined quickly and leaving it lying around is not a good answer.
I acknowledge a grinding noise on my brake Dodge Avenger
If you find out a grinding or scrap metal noise coming from the brake of your Dodge Avenger, it is highly possible that it will be linked to brake pads at the end of their existence, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out with time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may vary. Take out the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Dodge Avenger. If after looking at this point, you’re still going through a grinding noise on your Dodge Avenger, have a look at this article to find a solution.
I feel a constant noise that stops when I brake with my Dodge Avenger
If you are the victim of a continuous noise from the brakes Dodge Avenger that only ceases when you press your brake system, it is quite possible that caliper wear is the reason. Indeed, they can jam with time, specifically if they are not employed enough. In this case, they will tend to stay in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
I feel vibration when I brake with my Dodge Avenger
If in your situation, you feel a vibration when braking that would have come from the brake your Dodge Avenger, you will have to feel concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often informs of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your mechanic.
I experience a squealing noise when I brake with my Dodge Avenger
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Dodge Avenger, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
