It is never enjoyable to notice a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you detect a reversing gear noise that persists on your Peugeot Partner 2? Any gearbox trouble can be severe, but before making sure, it is better to do a few checks. Our team has written this content page to support you deal with it. First, we will see what the origins and the different gearbox noises can be on Peugeot Partner 2, and second, what are the solutions available to you.
Classical reverse Peugeot Partner 2 noises and some tips to maintain your gearbox
Why does the reversing of my Peugeot Partner 2 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound made by the reversing of your Peugeot Partner 2 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will put in on the gears will be monumental and you will produce a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely common if you notice a reverse noise on your Peugeot Partner 2 if you shift gear under these conditions.
Different Peugeot Partner 2 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most interested in this document, to learn about the origin of reversing noise on Peugeot Partner 2. Here are the 3 typical sounds you may be victim of.
I notice a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Peugeot Partner 2, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check this article for more information about strut mount noises on Peugeot Partner 2.
An increased reverse knocking noise on Peugeot Partner 2X
If you are subject to a knocking noise when you are in reverse with your Peugeot Partner 2 and this noise tends to increase as you gain speed. It is conceivable that you are dealing with a serious trouble that needs to be resolved as soon as possible before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears very fast. Take your vehicle to your mechanic quickly or browse this content about gearbox noise on Peugeot Partner 2 for more information.
I discover a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Peugeot Partner 2 reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
