It is never pleasurable to hear a sound on your vehicle that you don’t know where it comes from. You may be wondering what to do when you detect a reversing gear noise that remains on your Mercedes Classe E? Any gearbox trouble can be important, but before making sure, it is better to do a few investigations. Our team has written this paper to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Mercedes Classe E, and second, what are the solutions available to you.
Classical reverse Mercedes Classe E noises and some tips to protect your gearbox
Why does the reversing of my Mercedes Classe E make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult task. The noise caused by the reversing of your Mercedes Classe E is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will exert on the gears will be significant and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you experience a reverse noise on your Mercedes Classe E if you shift gear under these conditions.
Several Mercedes Classe E reversing noises and their origins
Finally in this section, we will move on to what you are probably most interested in this article, to find out about the source of reversing noise on Mercedes Classe E. Here are the 3 typical sounds you may be victim of.
I notice a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Mercedes Classe E, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to consult this content page for more info about strut mount noises on Mercedes Classe E.
An increased reverse knocking noise on Mercedes Classe EX
If you are subject to a knocking noise when you are in reverse with your Mercedes Classe E and this noise tends to increase as you gain speed. It is conceivable that you are confronting a serious trouble that needs to be resolved very fast before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your vehicle to your repair shop quickly or read this article about gearbox noise on Mercedes Classe E for more data.
I perceive a noise when I go in reverse
Listening a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Mercedes Classe E reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
