It is never pleasurable to hear a sound on your vehicle that you don’t know where it comes from. You may be wanting to know what to do when you identify a reversing gear noise that lasts on your Fiat 500 L? Any gearbox problem can be serious, but before making sure, it is better to do a few checks. Our team has made this document to help you resolve it. First, we will see what the sources and the different gearbox noises can be on Fiat 500 L, and second, what are the solutions available to you.
Classical reverse Fiat 500 L noises and some tips to preserve your gearbox
Why does the reversing of my Fiat 500 L make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult task. The sound generated by the reversing of your Fiat 500 L is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will put in on the gears will be monumental and you will make a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you experience a reverse noise on your Fiat 500 L if you shift gear under these conditions.
Different Fiat 500 L reversing noises and their triggers
Finally in this section, we will move on to what you are probably most interested in this content, to find out about the origin of reversing noise on Fiat 500 L. Here are the 3 typical sounds you may be victim of.
I find out a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Fiat 500 L, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to browse this content for more information about strut mount noises on Fiat 500 L.
An increased reverse knocking noise on Fiat 500 LX
If you are subject to a knocking noise when you are in reverse with your Fiat 500 L and this noise tends to increase as you gain speed. It is conceivable that you are going through a serious problem that needs to be resolved fairly quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your vehicle to your repair shop quickly or check out this content about gearbox noise on Fiat 500 L for more information.
I notice a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Fiat 500 L reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.
