It is never pleasant to perceive a sound on your automobile that you don’t know where it comes from. You may be wondering what to do when you identify a reversing gear noise that lasts on your Fiat Panda 2? Any gearbox issue can be important, but before making sure, it is better to do a few inspections. Our team has made this document to support you eliminate it. First, we will see what the origins and the different gearbox noises can be on Fiat Panda 2, and second, what are the solutions available to you.
Classical reverse Fiat Panda 2 noises and some tips to maintain your gearbox
Why does the reversing of my Fiat Panda 2 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult action. The sound created by the reversing of your Fiat Panda 2 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will apply on the gears will be significant and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you experience a reverse noise on your Fiat Panda 2 if you shift gear under these conditions.
Several Fiat Panda 2 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this page, to find out about the cause of reversing noise on Fiat Panda 2. Here are the 3 typical noises you may be victim of.
I listen to a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Fiat Panda 2, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check out this article for more information about strut mount noises on Fiat Panda 2.
An increased reverse knocking noise on Fiat Panda 2X
If you are subject to a knocking noise when you are in reverse with your Fiat Panda 2 and this noise tends to build up as you gain speed. It is possible that you are dealing with a serious issue that needs to be solved fairly quickly before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your automobile to your technician quickly or browse this article about gearbox noise on Fiat Panda 2 for more details.
I perceive a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Fiat Panda 2 reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
