If you too have already feel a grinding noise on Fiat 500 L, you must have asked yourself the same questions as all Fiat 500 L owners. We are rarely reassured when a grinding noise arises on our automobile. As we are conscious of your concerns and questions, we have decided to prepare this content page to be able to assist you in and facilitate your quest for a solution to your trouble. To do this, first we will see what the sources of a grinding noise on Fiat 500 L are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Fiat 500 L that originates from the shock absorbers and to finish from one of your doors.grinding-noise-fiat-500-l

I notice a grinding noise on Fiat 500 L when ever I turn the wheel

First, we will take a look at the grinding noises on Fiat 500 L that occur every time you turn the wheel of your automobile. Here are the main causes for this:

  • Hydraulic system

    • If you discover grinding noises on your Fiat 500 L when ever you turn the wheels, it may be connected to the hydraulic system of your automobile that allows you to operate the entire power steering part. In cases like this, the main point to check is the power steering fluid level, which if below the normal level could be an indicator of a leak of the unit. In this case, remember to redo the level and check it frequently. If the trouble continues, go to your technician.

  • Bearings

    • “A grinding noise on Fiat 500 L when ever I turn the wheels of my automobile” can also originate from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Think about to check their condition.

  • Steering pump

    • Finally, a grinding noise on Fiat 500 L when ever I turn may be connected to a tired steering pump power steering pump. The objective of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may arise between it and the belt. Remember to check that it is working properly.

    If despite these different possibilities you continue to experience a grinding noise on Fiat 500 L when turning your steering wheel, we have created a complete content page on this subject that can help you discover the origin.

    I perceive a grinding noise on Fiat 500 L when ever braking

    If you notice a grinding noise from the brakes of your Fiat 500 L, it is highly possible that it will be related to brake pads at the end of their life, indeed, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Take out the wheels in question and check the wear indicator on them. If they are dead they will have to be changed fairly quickly because they will fairly quickly damage your discs.
    If, despite crontrol, your grinding noise on Fiat 500 L does come from your brakes but is not connected to the pads, check this content to find out the other conceivable sources of brake noises on Fiat 500 L.

    I notice a grinding noise on Fiat 500 L at the shock absorbers

    If you are in the situation where you discern the grinding noise on Fiat 500 L as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply when ever you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several causes that can justify this noise. Indeed, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Fiat 500 L

    at each compression.
    Once you have examined all these points, you should have found the origin of your problem, go to your auto technician to fix the defective part. If you have not located the origin of your trouble, we suggest that you look at this content which discusses all possible origins of shock absorber noise on Fiat 500 L.

    I notice a grinding noise on Fiat 500 L at a door

    If that’s not enough, don’t hesitate to check out this complete content on door sounds on Fiat 500 L.
    It is conceivable, depending on the kind of of noise you acknowledge, that the hinge of your door is at the source of these noises. If this is the case, you will have to check it by opening your door and verifying that the grinding noise on your Fiat 500 L comes from a hinge that is too dry. To solve this trouble, first try to grease the hinge, in most cases this is enough to solve your trouble. If that’s not enough, don’t hesitate to read this complete content on door sounds on Fiat 500 L.