It is never pleasing to perceive a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you find a reversing gear noise that remains on your Citroen Jumpy 2? Any gearbox issue can be important, but before making sure, it is better to do a few inspections. Our team has written this content page to support you deal with it. First, we will see what the sources and the different gearbox noises can be on Citroen Jumpy 2, and second, what are the solutions available to you.
Classical reverse Citroen Jumpy 2 noises and some tips to look after your gearbox
Why does the reversing of my Citroen Jumpy 2 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The sound induced by the reversing of your Citroen Jumpy 2 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will exert on the gears will be significant and you will produce a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you notice a reverse noise on your Citroen Jumpy 2 if you shift gear under these conditions.
Different Citroen Jumpy 2 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most excited about in this content, to learn about the cause of reversing noise on Citroen Jumpy 2. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Citroen Jumpy 2, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to consult this content page for more details about strut mount noises on Citroen Jumpy 2.
An increased reverse knocking noise on Citroen Jumpy 2X
If you are subject to a knocking noise when you are in reverse with your Citroen Jumpy 2 and this noise tends to build up as you gain speed. It is conceivable that you are going through a serious issue that needs to be resolved fairly quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears before long. Take your automobile to your technician quickly or check out this article about gearbox noise on Citroen Jumpy 2 for more data.
I perceive a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Citroen Jumpy 2 reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
